2018 Water Report

2018 ANNUAL DRINKING WATER QUALITY REPORT

(Contains monitoring data from 2017)

PWSID #: 3130008 NAME: Mahoning Valley Nursing & Rehabilitation Center

Este informe contiene informacibn muy importante sobre su agua de beber. Traduzcalo b hable con alguien que to entienda bien. (This report contains very important information about your drinking water. Translate it, or speak with someone who understands it.)

Click This Link to Download a PDF of this Information: 2018 ANNUAL DRINKING WATER QUALITY REPORT

WATER SYSTEM INFORMATION:

This report shows our water quality and what it means. If you have any questions about this report or concerning your water utility, please contact Mike Mickey at (570] 386-5522. We want you to be informed about your water supply.

The Mahoning Valley Nursing & Rehabilitation Center Water System routinely monitors for constituents in your drinking water according to Federal and State laws. This table shows the results of our monitoring for the period of January 1^ to December 31^, 2017. Also included are the last analysis completed for other constituents. All drinking water, including bottled drinking water, may be reasonably expected to contain at least small amounts of some constituents. It’s important to remember that the presence of these constituents does not necessarily pose a health risk.

SOURCE(S) OF WATER:

Our water source(s) is/are:

Groundwater: Wells #1 and #2.

A Source Water Assessment of our source(s) has never been completed by the PA Department of Environmental Protection (PADEP). We believe that our source(s) have low risk of significant contamination.

MONITORING YOUR WATER:

We routinely monitor for contaminants in your drinking water according to federal and state laws. The following tables show the results of our monitoring for the period of January 1 to December 31, 2017. The State allows us to monitor for some contaminants less than once per year because the concentrations of these contaminants do not change frequently. Some of our data is from prior years in accordance with the Safe Drinking Water Act. The date has been noted on the sampling results table.

DEFINITIONS AND ABBREVIATIONS:

Action Level (AL) – The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.

Maximum Contaminant Level (MCL) – The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.

Maximum Contaminant Level Gael (MCLG) – The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.

Maximum Residual Disinfectant Level (MRDL.) – The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

Maximum Residual Disinfectant Level Goe/ (MRDLG) The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

Treatment 7*echnique /TT} – A required process intended to reduce the level of a contaminant in drinking water.

Mrem/year — millirems per year (a measure of radiation absorbed by the body)

pCi/L — picocuries per liter (a measure of radioactivity)

ppb — parts per billion, or micrograms per liter (pg/L)

DETECTED SAMPLE RESULTS

ppm — parts per million, or milligrams per liter (mg/L)

ppq — parts per quadrillion, or picograms per liter

ppt — parts per trillion, or nanograms

 

Chemical Coni‘ amfnants
 

Contaminant

MCL in

CCR

units

 

MCLG

Highest

Level

Detected

Range of

Detections

 

Units

gample

Date

Violation Y/N  

Sources of Contamination

Chlorine MRDL=4 MRDLG=4 1.25 0.64-1.25 ppm 2017 N Water additive used to control microbes

 

 

 

Contaminant

Minimum Disinfectant Residual Lowest Level Detected  

Range of Detections

 

 

Units

 

Sample Date

 

Violation Y/N

 

 

Sources of Contamination

Chlorine (101) 0.58 0.58 0.58-1.61 ppm 2017 N Wate      dt b

t

ed to
Chlorine (102) 0.93 0.93 0.93-1.75 ppm 2017 N I ä  :   t:t  .ä

‘t       dtvb

sed to

 

Lead and Copper
 

Contaminant

Action

Level (AL)

 

MCLG

90 Percentile

Value

 

Units

# of Sites

Above AL of Total Sites

Violation Y/N Sources of Contamination
Lead (2016) 0.015 0.015 0 ppm 0 N Corrosion of household

plumbing.

Copper (2016) 1.3 1.3 0.225 ppm 0 N Corrosion of household

Plumbing.

 

HEALTH EFFECTS:

NO MCL’S OR TREATMENT TECHNIQUES WERE EXCEEDED.

OTHER VIOLATIONS:

EDUCATIONAL INFORMATION:

The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs and wells. As water travels over the surface of the land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity. Contaminants that may be present in source water include:

  • Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.
  • Inorganic contaminants, such as salts and metals, which can be naturally-occurring or result from urban stormwater run-off, industrial or domestic wastewater discharges, oil and gas production, mining, or farming.
  • Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban stormwater runoff, and residential uses.
  • Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by- products of industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff, and septic systems.
  • Radioactive contaminants, which can be naturally-occurring or be the result of oil and gas production and mining activities.

In order to ensure that tap water is safe to drink, EPA and DEP prescribes regulations which limit the amount  of certain contaminants in water provided by public water systems. FDA and DEP regulations establish limits for contaminants in bottled water which must provide the same protection for public health.

Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the Environmental Protection Agency’s Safe Drinking Water Hotline (800-426-4791).

In 2011 the Mahoning Valley Nursing & Rehabilitation Center’s water system was upgraded to comply with requirements of the Federal Groundwater Rule. Disinfection practices were evaluated and an additional chlorine contact tank and various valves were added. Chlorine levels were increased to meet compliance with the Groundwater Rule.

INFORMATION ABOUT LEAD

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children.  Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. Mahoning Valley Nursing & Rehabilitation Center is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.aov/safewater/lead.

: 2018 Water Report

Upload Resume